Motion RIFE TH400 4L80E Powerglide Transmission Pressure Sensor Block & Mount 16-00002
Motion RIFE Transmission Pressure Sensor Block & Mount 200/300 PSI 16-00002 for TH400 and Powerglide Transmission
200PSI sensor: Converter Pressure
300PSI sensor: Line Pressure
(2) Spare M5 connectors for two external temperature sensors
Automatic transmission and torque converter technology continues to evolve and improve. Racers take driveshaft, engine rpm, and transmission pressure data to refine their strategy, converter setup, and dump valves.
This mount bolts to the pan bolts on your Turbo 400 or Powerglide transmission and gives you the ability to plumb up sensors for Line and Converter PSI so that the plumbing stays with your transmission and it is as simple as disconnecting the main deutsch connector to remove a transmission and the associated sensors.
This dual sensor tucks up into the back of the transmission to allow for clearing trans tunnels, exhaust, and other items that would normally be in the way.
RIFE innovative dual silicone isolated sensors are more accurate, withstand vibrations better, and makes wiring easier.
Features:
-Easier wiring: Sensors share ground and 5v reference for easier sensor wiring. One deutsch connector makes for easier routing and less plugins.
-Out of the way: This moves sensors to an area that is generally open so that sensors are not in your way of installing and removing fittings on to the transmission where space is limited.
-Dual Isolated sensors: less prone to failure from vibration due to innovative RIFE pod sensor style design.
-Easy swap sensors: If you want to change to a different PSI sensor or replace, changeovers are easy.
-Plumbing stays with the transmission. Meaning less things to hookup once the transmission is in the chassis.
-Adjustable mounting: Slide block forward or backward to clear other dump valves, solenoids, etc.
Included:
-RIFE 200/300 PSI Dual Sensor Block with 3AN male inlets
-Anodized Aluminum Mounting Bracket
-Necessary hardware